Free shipping on purchases over 300€ 
Free shipping on purchases over 300€
PLUG TEXAS-TSK 50
Plug in connector for welding cables; brass body, elastomerized material insulating covering, heat and humidity resistant and insulation resistance not less than 2MOhm.
315A 60%
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
SOCKET TEXAS-TBK 50
Socket for connection of welding cables with body brass. Insulated covering in elastomerized material, heat and humidity resistant with insulation resistance more than 2MOhm.
Cable up to 50mmq
315A 60%
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Feed roll for flux wire Ø 0,9 - 1,2 mm Telwin
For TELWIN machines :
BIMAX 140 - 152 - 162 Turbo - 4.165 Turbo
TECHNOMIG 150 - 180 - 180 EURO - 210 Dual Synergic
MAXIMA 160 - 190 - 200
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
| Combinations | Price | |
| 6,08 € | ||
| 6,08 € | ||
| 6,08 € | ||
10 contact tips for steel welding for MB25 and MB36 torch
Thread M6
3 available diameters : 0,8 - 1 and 1,2 mm
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Steel chipping for slag removal
Weigth 273 gr
Steel handle.
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
| Combinations | Price | |
| 6,10 € | ||
| 6,10 € | ||
Sachet 10 pcs
2 available diameters : 0,8 and 1mm
Length 28 mm
For MB25 and MB36 torch, for aluminium welding
M6
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Stainless steel cleaner, Made in Italy branded Siliconi S.p.A.
-Eco-friendly and biodegradable
-Low VOC
-Not flammable
-Excellent cleaner, shiny effect
-It leaves protective film anti-fingerprints-traces
-It does not stain
-Size: 500 ML
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Acid-resistant brush for pickling and passivating.
Plastic handle.
Total length 370mm
Bristle width 30mm
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
| Combinations | Price | |
| 6,45 € | ||
| 6,45 € | ||
| 6,45 € | ||
3 available diameters: 0,6- 0,8 e 1 mm.
Thread M5
Length: 18 mm
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Welding chipping hammer with steel head and tempered tip and wooden handle.
Weight: 250 g
Length: 270 mm
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Feed roll for steel/stainless steel Ø 0,6 - 0,8- 0,9 mm
For TELWIN machines:
BIMAX 110 - 132 -140 -152 - 162 Turbo - 4.165 Turbo
TECHNOMIG 150 - 180 - 210 Dual Synergic
MAXIMA 160- 190 - 200
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
| Combinations | Price | |
| 6,78 € | ||
| 6,78 € | ||
For steel and stainless steel
2 available diameters:
- for wire Ø 0,6 to 0,9 mm.
- for wire Ø 1 to 1,2 mm.
Length 3 m
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
3 conical nozzle 12 mm for MB15 torch 150A
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
| Combinations | Price | |
| 7,88 € | ||
| 7,88 € | ||
10 pcs
2 available diameters: 0,8 and 1 mm
M8, Cu.
Length 30 mm
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
| Combinations | Price | |
| 7,90 € | ||
| 7,90 € | ||
10 pcs
2 available diameters: 1 and 1,2mm
M8, length 30 mm
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
For stainless steel cleaning
Length 28 cm
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
For Helvi models :
Helvi lite Filmaker 182
Fox 160 / 170
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Feed roll for aluminium welding Ø 1mm Telwin
For Telwin machines:
BIMAX 140 - 152 - 162 Turbo - 4.165 Turbo
TECHNOMIG 150 -180 - 180 EURO
TECHNOMIG 180 Dual Synergic- 210 Dual Synergic
MAXIMA 160 - 190 - 200
TELMIG 170/1 - 180/2 - 195/2 - 200/2 - 203/2 - 250/2 - 251/2 Turbo - 281/2 TURBO
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
To be used with CO2 female regulator in order to connect the bottles with female connection.
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
For Helvi models :
Fox 180 - 181 - 189
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Magnetic holder
Height 102 mm
Max 23 kg
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Suitable for Helvi Fox 185 Flex-line
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Cable section: 16 - 25 - 35 mm²
200A 60 % and 250A 35 %
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Ground clamp with rustproof steel structure. Copper-plated brass contacts and copper plait.
Weight 330gr
400A 35%
300A 60%
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Gas adapter 2m + adapter and 2 rings.
Gas hose for rechageable bottle
Diameter inside: 6 mm
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Throwaway bottle kit
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
| Combinations | Price | |
| 10,81 € | ||
| 10,81 € | ||
M8X30 MM CUCRZR
10 pcs
2 diameters availables: 1 and 1.2mm.
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Capacity 34 kg
Height 122 mm
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Adapter for 300 mm coils
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Suitable for Helvi Fox 185
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
MIG magnetic support
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Dinse adapter to connect a 50mmq male connector on a 25mmq socket
Adapter 10-25mm2 male plug to 35-95mm2 female socket.
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
1 feed roll for aluminium welding Ø 0,8 - 1 mm GYS
For Gys Machines:
Multipearl 210-2
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
For MB15 torch
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Dinse adapter to connect a 25mmq male connector on a 50mmq socket.
Adapter 35-95mm2 male plug to 10-25mm2 female socket.
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
2 small magnetic holders
Corners: 30, 60, 45 e 90º
Traction power: 10 kg
Size: 59 x 50 x 16
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Flow tester for MIG-Mag torch. To be used in front of the torch to be sure of the gas welding pressure.
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Suitable for Telwin Technomig 215 Dual Synergic and Technomig 240 Wave
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Ceramic antispatter, Made in Italy branded Siliconi S.p.A.
-Ceramic-based
-It resists up to 1500° C
-Ideal for welding torches and automatic machines
-It lasts for many working hours
-Also suitable for plasma cutting
-Size: 500 ML
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Multifunction weld plier
Useful to clean the nozzle and remove it, to cut the wire and replace the contact tip.
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
For TELWIN models:
TECHNOMIG 215 Dual Synergic - 225 - 243 WAVE
ELECTROMIG 220 Synergic - 230
MASTERMIG 220/2 - 270/2
TELMIG 281/2
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Suitable for Helvi Fox 185 Flex-line
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
For HELVI machines :
Fox 181 - 180 - 189
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Special solid wire particularly suitable for single pass welding of galvanized or electro-galvanized steels.
The presence of purifiers elements in the weld pool -Al-Ti-Zr, inhibit the formation of blowholes and porosity, also for steels with a dirty or rusty surface. It has to be used with Mix Argon CO2 to obtain welds without spatter well connected by cords.
Diameter: 0.8mm
700gr
AWS A5.18: ER 70S-2
Coil diameter: 100mm
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
1 feed roll 0,6 / 0,8 mm for steel/stainless steel welding GYS.
For GYS machines:
Multipearl 210-2
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
For TELWIN models:
TECHNOMIG 215 Dual Synergic - 225 - 240 WAVE
ELECTROMIG 220 Synergic - 230
MASTERMIG 220/2 - 270-2
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
| Combinations | Price | |
| 16,70 € | ||
| 16,70 € | ||
2 available diameters:
Ø 0,6 to 0,9 mm
Ø 1 to 1,2 mm
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Holder with 6 magnets.
Suitable for different shapes, corners, circle and flat.
Traction power : 8 kg
Size: 100 x 76 x 32
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
Set of 2 Stronhand Tools positioners ideal for outside or inside edges.
They hold material from the outside when access to the inside is difficult.
For holding and positioning sheet metal, round tubes, square, angled or flat pieces.
The inner/outer angle magnets consist of two independent rectangular magnets for a constant magnetic force when both sides are attached to workpieces.
Pulling capacity: 15 and 9 kg
Dimensions of smallest positioner: 76x52, thickness 14
Dimensions largest positioner: 125x85, thickness 18
Angles: 90°, 30/60°
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
The kit contains the consumables for the Mig torch 15 :
- No. 2 springs,
- No. 2 diffusers for torch head,
- No. 2 nozzles Ø12,
- No. 10 contact tip Ø 0.8
- No. 10 contact tip Ø 1.0,
in a practical transparent case.
Fast delivery (3-5 days) with DHL Courier in
Austria
Choose your country
MIG MAG welding accessories
MIG MAG welding material consists first of all of the welding machine, which has a ground cable and clamp and a MIG torch. On our website top-welding.com you will find many products for MIG MAG welding, but it is important to take into account all the accessories and consumables, to fully take advantage of the full potential of the MIG MAG welding machine. In fact, the same model of welding machine can allow you to weld different materials and thicknesses. Therefore top-welding.com recommends and offers a whole range of consumables and accessories in addition to machinery, according to your needs. The material you will find has been specially selected among the various manufacturers available on the market, it has been tested by people who have been in the industry for more than twenty years and can therefore guarantee its operation and characteristics.
MIG MAG TORCH
The torches have been selected according to the products presented on the site. Their amperage, welding materials, to ensure excellent ergonomics and facilitate the operator. The torches and consumables are generally compatible with the European standards that welding machines ‘manufacturers follow.
NOZZLES
The correct nozzles for each welding machine are recommended according to the standard torch of the product. If you have any doubts about the diameters or the type of torch in your possession, write us an e-mail and we will recommend the correct code.
CONTACT TUBES
Contact tubes are also very important for the correct passage of the wire and the welding current; different diameters are provided in accordance with the thickness of the wire. It is also indicated whether the thread to screw the tube onto the torch support is M5, M6, M8. It is important to replace them regularly based on wear, the material to be welded and its usage.
SHEATH
The wire guide sheath is a tube inside which the welding wire runs. On top-welding.com, we mainly offer sheaths for aluminum welding; the wire made of this material is very soft and difficult to slide inside the torch and standard sheath. In fact, the welder often prefers to buy a second torch, replace the sheath and use it only for aluminum. For this material, it is not recommended to weld with torches longer than 3 meters.
WIRE COIL
On our website top-welding.com we recommend wire coils of various materials, thickness and sizes.
Wire in 100mm (700gr) diameter, the smallest, normally used on DIY welding machines, 200mm (3 - 5 kg) for individuals or the maintenance personnel who use the welding machine much more often, and 300mm (15kg) for industry and carpentry.
The wire has different thicknesses depending on the power of the welder and the thickness to be welded, ranging from 0.6mm to 1.2mm.
DRAG ROLLER
Drag rollers are also very important as they allow a constant speed of the wire and avoid its possible deformation. The drag roller has always two channels of different thickness and the operator must position it in the correct direction, according to the thickness and type of the wire.
Telwin, Deca, Gys, Helvi do not use the same rollers and their dimensions and diameters are different.
Italy
Belgium
Luxembourg
Netherlands
Monaco
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Germany
Spain
France
