Free shipping on purchases over 300€ 
Free shipping on purchases over 300€
INCLINABLE AND ROTATING TABLE. ELECTRICAL SYSTEM WITH SEPARATE 24V CIRCUIT FOR ON-BOARD MACHINE CONTROLS.
Included in the price:
-Keyless chuck 1-16 mm B16
-Drill chuck arbor MT 2 B16
Technical specifications:
Max drilling capacity on cast iron with pre-drilling hole: Ø 20 m
Max drilling capacity on steel with pre-drilling hole(s235jr): Ø 16 mm
Continuous drilling capacity: Ø 12 mm
Chuck sizes: 1 - 16 mm B16
Approx spindle speeds: (12) 280 ÷ 2380 rpm
Spindle travel: 80 mm
Quill: ø 40 mm
Column: ø 72 mm
Height: 990 mm
Distance spindle axis - column surface: 160 mm
Distance between spindle nose and table: 435 mm
Distance between spindle nose and base: 650 mm
Table dimensions: ø 290 mm
Single-phase motor: 230 V 50 Hz 0,65 kW
Net weight: 48 kg
Fast delivery (3-5 days) with DHL Courier in
Lithuania
Free shipping
Choose your country
ROTATING AND TILTING TABLE WITH DOUBLE ARM, TILTING HEAD, ELECTRICAL SYSTEM WITH SEPARATE 24V CIRCUIT FOR ON-BOARD MACHINE CONTROLS.
Included in the price:
-Keyless chuck 1-16mm/B16
-Drill chuck shank MT 2
Technical specifications:
Max drilling capacity on cast iron with pre-drilling hole: Ø 20 mm
Max drilling capacity on steel with pre-drilling hole(s235jr): Ø 16 mm
Continuous drilling capacity: Ø 12 mm
Spindle taper: CM 2
Chuck sizes: 1 - 16 mm B16
Approx spindle speeds: (12) 300 ÷ 2550 rpm
Spindle travel: 65 mm
Quill: ø 40 mm
Column: ø 72 mm
Sliding travel: 280 mm
Head tilt left and right: 90º L ; 45º R
Height: 810 mm
Distance chuck-column: 375 mm
Distance between spindle nose and base: 505 mm
Table dimensions: ø 290 mm
Tilting table: ± 45°
Single-phase motor: 230 V 50 Hz 0,375 kW
Dimensions: 950 x 300 x 810h mm
Net weight: 46 kg
Fast delivery (3-5 days) with DHL Courier in
Lithuania
Free shipping
Choose your country
NEW BELT TENSION DEVICE, DRILLING DEPTH READOUT, LED LIGHT INCLUDED, ROTATING AND INCLINABLE TABLE. ELECTRICAL SYSTEM WITH SEPARATE 24V CIRCUIT FOR ON-BOARD MACHINE CONTROLS.
Included with the price:
-Keyless chuck 1-16mm B18
-Drill chuck shank MT 2
Technical specification:
Max drilling capacity on cast iron with pre-drilling hole: Ø 25 mm
Max drilling capacity on steel with pre-drilling hole(s235jr): Ø 20 mm
Continuous drilling capacity: Ø 16 mm
Spindle taper: CM 2
Chuck sizes: 1 - 16 mm B18
Approx spindle speeds: (16) 180 ÷ 2770 rpm
Spindle travel: 85 mm
Quill: ø 47 mm
Column: ø 72 mm
Height: 990 mm
Distance chuck-column: 180 mm
Distance between spindle nose and table: 420 mm
Distance between spindle nose and base: 600 mm
Table dimensions: 305 x 305 mm
Slot: 16 mm
Tilting table: ± 45°
Single-phase motor: 230 V 50 Hz 0,75 kW
Net weight: 60 kg
Fast delivery (3-5 days) with DHL Courier in
Lithuania
Free shipping
Choose your country
INCLINABLE TABLE. ELECTRICAL SYSTEM WITH SEPARATE 24V CIRCUIT FOR ON-BOARD MACHINE CONTROLS.
Included in the price:
-Keyless chuck 5-20mm B22
-Drill chuck shank MT 4
Technical specifications:
Max drilling capacity on cast iron with pre-drilling hole: Ø 32 mm
Max drilling capacity on steel with pre-drilling hole(s235jr): Ø 28 mm
Continuous drilling capacity: Ø 20 mm
Spindle taper: MT 4
Chuck sizes: 5-20 mm B22
Approx spindle speeds: (12) 150 ÷ 2450 rpm
Spindle travel: 120 mm
Quill: ø 62 mm
Column: ø 92 mm
Height: 1710 mm
Distance column-chuck: 260 mm
Table dimensions: 460 x 425 mm
Slot: 14 mm
Tilting table: ± 45°
Single-phase motor: 230 V 50 Hz 1,5 kW
Net weight: 125 kg
Fast delivery (3-5 days) with DHL Courier in
Lithuania
Free shipping
Choose your country
NEW BELT TENSION DEVICE, REVERSIBLE TABLE WITH INTEGRATED SLIDING VICE , DRILLING DEPTH READOUT, LED LIGHT INCLUDED. ELECTRICAL SYSTEM WITH SEPARATE 24V CIRCUIT FOR ON-BOARD MACHINE CONTROLS.
Included in the price:
-Keyless chuck 1
-Drill chuck shank MT 4
Technical specification:
Max drilling capacity on cast iron with pre-drilling hole: Ø 32 mm
Max drilling capacity on steel with pre-drilling hole(s235jr): Ø 28 mm
Continuous drilling capacity: Ø 20 mm
Spindle taper: 4
Spindle taper: 1 - 16 mm B18
Approx spindle speeds: (12) 150 ÷ 2450 rpm
Spindle travel: 120 mm
Quill: ø 62 mm
Column: ø 92 mm
Height: 1720 mm
Distance chuck-column: 255 mm
Distance between spindle nose and table: 700 mm
Table dimensions: 460 x 425 mm
Distance between spindle nose and base: 1220 mm
Slot: 14 mm
Vice: 210 x 165 mm
Single-phase motor: 230 V 50 Hz 1,5 kW
Net weight: 135 kg
Fast delivery (3-5 days) with DHL Courier in
Lithuania
Free shipping
Choose your country
PARTIALLY ROTATING TABLE, WITH 125MM VICE.
Included the price:
-Drill chuck with key 1-16 B18
-Spindle drilled MT 3
-Reduction sleeve MT 3/2
Technical specifications:
Max drilling capacity on cast iron with pre-drilling hole: Ø 31,75 mm
Max drilling capacity on steel with pre-drilling hole(s235jr): Ø 31,75 mm
Spindle taper: CM 3
Continuous drilling capacity: Ø 25 mm
Chuck sizes: 1 ÷ 16 B18
Approx spindle speeds: (9) 160 ÷ 1880 rpm
Spindle travel: 130 mm
Column: Ø 102 mm
Distance between spindle axis and column: 230 mm
Distance between spindle nose and table: 700 mm
Distance between spindle nose and base: 1175 mm
Table dimensions: 330 x 380 mm
Travel of table: 670 mm
Slot: 14 mm
Base dimensions: 300 x 325 mm
Motor: 400V 50Hz 1,5 kW
Overall sizes: 900 x 430 x 1760 mm
Net weight: 280 kg
Fast delivery (3-5 days) with DHL Courier in
Lithuania
Free shipping
Choose your country
WITH AUTOFEE, COOLANT SYSTEM, PARTIALLY ROTATING TABLE, WITH 125MM VICE.
Suitable for tapping.
Included in the price:
-Drill chuck with key 1÷16 B18
-Spindle drilled MT 3
-Reduction sleeve MT 3/2
Technical specifications:
Max drilling capacity on cast iron with pre-drilling hole: Ø 31,75 mm
Max drilling capacity on steel with pre-drilling hole(s235jr): Ø 31,75 mm
Continuous drilling capacity: Ø 25 mm
Spindle taper: MT 3
Chuck sizes: 1 ÷ 16 B18
Approx spindle speeds: (8) 160 ÷ 2200 rpm
Spindle travel: 130 mm
Column: Ø 115 mm
Feed range: 0,1- 0,16- 0,26 mm/giro
Distance between spindle axis and column: 223 mm
Distance between spindle nose and table: 696 mm
Distance between spindle nose and base: 1135 mm
Table dimensions: 400 x 470 mm
Travel of table: 510 mm
Slot: 14 mm
Base dimensions: 400 x 310 mm
Motor: 400 V 50 Hz 0,85 kW / 1,1 kW
Cooling pump: 400 V 50 Hz 40 W
Overall sizes: 900 x 545 x 1765 mm
Net weight: 340 kg
Fast delivery (3-5 days) with DHL Courier in
Lithuania
Free shipping
Choose your country
REVERSIBLE, TILTING HEAD, COOLING SYSTEM, TIMED TAPPING AND AUTOMATIC DOWN FEED, ROTATING TABLE.
Included in the price:
-Keyless chuck 1-16 B16
-Drill chuck shank MT 4
-Reduction sleeve MT 4/3
-Reduction sleeve MT 3/2
Technical specifications:
Max drilling capacity on cast iron with pre-drilling hole: Ø 40 mm
Max drilling capacity on steel with pre-drilling hole(s235jr): Ø 35 mm
Continuous drilling capacity: Ø 30 mm
Tapping capacity: 22 mm
Spindle taper: CM 4
Chuck sizes: 1 ÷ 16 B16
Approx spindle speeds: (12 ) 75 ÷ 3200 rpm
Spindle travel: 120 mm
Spindle rotation: Dx - Sx
Head tilt left and right: ±60°
Quill: Ø 76 mm
Column: Ø 115 mm
Feed range: (3) 0,1 - 0,18 - 0,26 mm/g
Distance between spindle axis and column: 297 mm
Distance between spindle nose and table: 715 mm
Distance between spindle nose and base: 1180 mm
Table dimensions: 500 x 460 mm
Slot: 14 mm
Base dimensions: 470 x 670 mm
Motor: 400 V 50 Hz 1,1/1,5 kW
Dimensions: 700 x 480 x 1850 mm
Net weight: 340 kg
Fast delivery (3-5 days) with DHL Courier in
Lithuania
Free shipping
Choose your country
SQUARE COLUMN AND DOVETAIL GUIDES, TIMED REVERSING, TAPPING.
Included in the price:
-Chuck with key 1 ÷ 16 B16
-Drill chuck shank MT 4 B16
-Spindle taper shank MT 4 ø27 mm
-Reduction sleeve MT 4/3
-Reduction sleeve MT 3/2
-Oilers
-Tie rod M16
-Service keys
Technical specifications:
Max drilling capacity on cast iron with pre-drilling hole: ø 40 mm
Max drilling capacity on steel with pre-drilling hole(s235jr): ø 45 mm
Fast delivery (3-5 days) with DHL Courier in
Lithuania
Free shipping
Choose your country
SQUARE COLUMN AND DOVETAIL GUIDES, TIMED REVERSING, TAPPING.
Included in the price:
-Chuck with key 1 ÷ 16 B16
-Drill chuck shank MT 4 B16
-Spindle taper shank MT 4 ø27 mm
-Reduction sleeve MT 4/3
-Reduction sleeve MT 3/2
-Oilers
-Tie rod M16
-Service keys
Technical specifications:
Max drilling capacity on cast iron with pre-drilling hole: ø 40 mm
Max drilling capacity on steel with pre-drilling hole(s235jr): ø 45 mm
Fast delivery (3-5 days) with DHL Courier in
Lithuania
Free shipping
Choose your country
REVERSIBLE WITH COOLANT SYSTEM AND TEMPORISED TAPPING.
Included in the price:
-Self-locking chuck 1 ÷ 16 B16
-Keyed chuck 1 ÷ 13 B16
-Drill chuck shank MT 4 B16
-Spindle taper shank MT 4 ø27 mm
-Reduction sleeve MT 4/3
-Reduction sleeve MT 3/2
-Oilers
-Tie rod M16
-Service keys
Technical specifications:
Max drilling capacity on cast iron with pre-drilling hole: Ø 40 mm
Drilling capacity:Steel C60: Ø 32 mm
Face milling cutter max: Ø 80 mm
End milling capacity: Ø 25 mm
Tapping capacity: Ø 22 mm
Spindle taper: CM 4
Approx spindle speeds: (6) 75 ÷ 1600 rpm
Spindle travel: 130 mm
Spindle rotation: Dx - Sx
Quill: Ø 76 mm
Column: Ø 115 mm
Head tilt left and right: ± 60°
Manual vertical feed division: 0.02 mm
Distance between chuck and column: 260 mm
Distance between spindle nose and table: 715 mm
Table dimensions: 585 x 190 mm
Table slots: 12 mm
Longitudinal axis: 360 mm
Cross axis: 250 mm
Base dimensions: 648 x 412 mm
Base slot: 14 mm
Single-phase motor: 230 V 50 Hz 1,5 kW
Cooling pump: 230v 50 Hz 0.4 KW
Overall sizes: 740 x 790 x 1960h mm
Net weight: 355 kg
Fast delivery (3-5 days) with DHL Courier in
Lithuania
Free shipping
Choose your country
REVERSIBLE WITH COOLANT SYSTEM AND TEMPORISED TAPPING.
Included in the price:
-Self-locking chuck 1 ÷ 16 B16
-Keyed chuck 1 ÷ 13 B16
-Drill chuck shank MT 4 B16
-Spindle taper shank MT 4 ø27 mm
-Reduction sleeve MT 4/3
-Reduction sleeve MT 3/2
-Oilers
-Tie rod M16
-Service keys
Technical specifications:
Max drilling capacity on cast iron with pre-drilling hole: Ø 40 mm
Drilling capacity:Steel C60: Ø 32 mm
Face milling cutter max: Ø 80 mm
End milling capacity: Ø 25 mm
Tapping capacity: Ø 22 mm
Spindle taper: CM 4
Approx spindle speeds: (6) 75 ÷ 1600 rpm
Spindle travel: 130 mm
Spindle rotation: Dx - Sx
Quill: Ø 76 mm
Column: Ø 115 mm
Head tilt left and right: ± 60°
Manual vertical feed division: 0.02 mm
Distance between chuck and column: 260 mm
Distance between spindle nose and table: 715 mm
Table dimensions: 585 x 190 mm
Table slots: 12 mm
Longitudinal axis: 360 mm
Cross axis: 250 mm
Base dimensions: 648 x 412 mm
Base slot: 14 mm
Motor: 400 V 50 Hz 1,1 - 1,5 kW
Cooling pump: 400v 50 Hz 0.4 KW
Overall sizes: 740 x 790 x 1960h mm
Net weight: 355 kg
Fast delivery (3-5 days) with DHL Courier in
Lithuania
Free shipping
Choose your country
The professional drill press is an essential tool for drilling flat surfaces, achieving excellent results in terms of precision and timing. The name benchtop drill press derives precisely from the fact that this tool is equipped with a power tool in a vertical position with respect to the workbench.
The main feature of the fervi drill press is precisely that it has a drilling element which, by means of a lever controlled by the operator, slowly rises and falls vertically in order to drill with precision. If the bench drill is equipped with a special regulator, it is also possible to adjust the inclination at which it is to be drilled. Various types of materials can be drilled with this power tool, such as wood, plastics, resins, steel sheets and profiles, aluminium and other metal alloys, with a drilling depth ranging from 30 to 80 millimetres, depending on the type of fervi drill used.
Tendentially used by craftsmen and professionals, the professional drill press can now also be purchased by DIY enthusiasts at a low cost thanks to the cheaper options on the market. Tuttosaldatura offers various models of the fervi drill press, from the smallest and easily transportable version to the largest and most robust, all at the best price.
The drill press can be placed on a workbench without taking up too much space, and it is recommended to fix it in place so that it is more stable when drilling. Another version of the professional drill press is the stationary drill press; this version is dedicated to working on large workpieces and with greater drilling depths. This model of drill must be fixed to the floor in a precise position.
Some of the most important features of a fervi drill press to consider are for example
- the maximum drilling depth that can be reached by that specific model; you need to assess how much force you need to drill a specific material to a specific depth.
- the rotation speed of a drill must be chosen according to the work to be carried out and the type of material to be drilled.
- a fervi drill press can have two types of transmission, depending also on the size of the drill. The first type of transmission that is used is the gear drive. a drill press equipped with this type of transmission is usually large, with robustness and reliability as the benchmark, adding multiple functions available. The second type of transmission that is used is the belt drive, a bench drill equipped with this transmission is lighter and more transportable, usually smaller in size. The main point of differentiation is the 30 mm diameter, drills with gear drives use bits larger than 30 mm, those with belt drives use bits smaller than 30 mm in diameter.
Proper use of the tool is the most logical safety measure to always keep in mind; never stop the rotation of the chuck with your hands but always wait for it to stop by inertia. Keeping the drill press and the support table clean and tidy ensures that the tool lasts longer, while at the same time decreasing the risk that any splinters left by the workpieces may be ejected in the direction of the operator, putting the operator's eyes at risk; it is therefore advisable to always wear protective glasses for the eyes. The clothing used should also be taken into consideration and it is recommended to use a Fervi drill press with clothing that covers the entire body without leaving areas exposed to possible dangers; hands in particular should be protected with suitable gloves.
The Fervi brand
Tuttosaldatura collaborates with Fervi for all drilling, finishing and metal grinding equipment.
Fervi stands out as a solid and competitive company and is the reference point for the design and distribution of high quality and reliable machine tools. The variety of products offered by Fervi facilitates not only large companies but also small craftsmen, concretely improving the quality of their daily work, offering functional and safe machinery suitable for every need.
Italy
Austria
Belgium
Luxembourg
Netherlands
Monaco
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Bulgaria
Estonia
Latvia
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Germany
Spain
France
