An Affordable, Easy-to-Use Modular Fixturing System. Increase work quality and productivity! Fixture at ANY POINT on the tabletop.
The FixturePoint System is ideal for the set-up of 2D frames. Use the FixturePoint Kits to get started right away, working comfortably, safely, and efficiently for improved work quality and productivity!
FixturePoint Clamps and Components can be inserted into the 16 mm holes on the 900 x 600 mm tabletop for complete flexibility in Modular Fixturing.
Complete with clamps & components Kit:
- 4 Inserta Clamps: Insert into any hole on the tabletop for fast hold-down clamping.
- 4 Positioning Stops: Mount on the tabletop to locate and stop stock.
- 4 Inserta Stops: Mount on the tabletop to locate and stop stock.
- 4 Stop Bars: Mount on the tabletop to locate and stop stock. Use with Threaded Adaptors.
- 4 Threaded Adaptors: Mount underneath tabletop to convert any table hole to an M10 threaded hole.
- 8 Magnetic Rests: Place anywhere on the table to elevate and level stock.
Tabletop Surface Dimensions (mm): 900x600
Weight : 33 Kg
Tabletop Material Thickness (mm): 4
Tabletop Height WITH leg frame (mm): 860
Tabletop Height WITHOUT leg frame (mm): 158
Fast delivery (3-5 days) with DHL Courier in Sweden
Free shipping
Set includes:
SP010-30-005 Angle 175x50x75mm hole/slot 8 pcs.
SP010-50-002 Universal stop 225x50x25mm 4 pcs.
SP010-70-001 Compensation clamp 180° with handle 300x300mm 6 pcs.
SP010-60-001 Quick locking bolt fi 28x50mm 22 pcs.
SP010-90-003A Hexagonal Allen Key 150mm 1 pc.
SP010-90-004 Nylon brush 30x80mm 1 pc.
SP010-90-001 Oil stone for cleaning 200x50x25mm 1 pc.
SP010-90-002 Spray bottle 1 pc.
Fast delivery (3-5 days) with DHL Courier in Sweden
Free shipping
Set includes:
SP010-23-600L Clamping and positioning angle 375x100x600 (left) 1 pc.
SP010-23-600R Clamping and positioning angle 375x100x600 (right) 1 pc.
SP010-31-004 Flat angle bracket 175x175x25 4 pcs.
SP010-30-005 Locking and locating angle 175 x 50 x 75 hole/slot 4 pcs.
SP010-50-002A Universal Fastener 225x50x25 6 pcs.
SP010-60-001 Quick locking bolt fi28x50 22 pcs.
SP010-70-011 Screw lock with swivel handle 300x300 180deg 6 pcs.
SP010-70-012 Screw lock 90° with revolving handle 300x150 2 pcs.
SP010-70-013 Screw lock with revolving handle 300x300 45° 2 pcs.
SP010-90-001 Oil stone 1 pc.
SP130-01-102 Spray bottle 1 pc.
SP010-90-003A Hexagonal Allen key 150 mm 1 pc.
SP010-90-004 Nylon brush fi30x80 1 pc.
Fast delivery (3-5 days) with DHL Courier in Sweden
Free shipping
The cast table top is made of high-strength EN-GJL-300 cast iron, which is characterised by high wear resistance.
25MM THICKNESS The table top with a thickness of 25 mm guarantees the durability of the table and resistance to mechanical damage.
MILLIMETRIC SCALE The applied millimetre scale facilitates precise assembly of the workpiece.
3D SIDE Allows the work surface to be enlarged and the table tops to be joined.
D28 SYSTEM 28 mm drilled and chamfered holes.
Worktop dimensions 1200 x 1200 x 200 mm
Material EN-GJL-300 cast iron according to EN 1561
Table top thickness 25 mm
Horizontal table accuracy 0.1/1000mm
Vertical table accuracy 0.1/200 mm
Standard D28 (28 mm diameter drilled and milled holes)
Load capacity 2000 kg/leg
Leg type with adjustable foot +5cm
Leg length 620 mm
Number of legs 4 pcs.
Total table height 870 mm
Weight of table top 514 kg
Fast delivery (3-5 days) with DHL Courier in Sweden
Free shipping
S355J2+N STEEL The welding table top is made of S355J2+N steel, which is characterised by high strength and resistance to impact and deformation, and also provides protection against corrosion and weld spatter.
The 25 mm thick table top guarantees the table's durability and resistance to mechanical damage.
MILLIMETRE SCALE
The applied millimetre scale facilitates precise assembly of the workpiece.
3D SIDE
Enables the work surface to be enlarged and table tops to be joined.
D28 SYSTEM
28 mm drilled and chamfered holes.
Worktop dimensions 1500 x 1000 x 200 mm
Material Steel S355J2+N according to EN 10025-2
Table top thickness 25 mm
Table horizontal accuracy 0.1/1000mm
Vertical table accuracy 0.1/200 mm
Standard D28 (28 mm diameter drilled and milled holes)
Load capacity 2000 kg/leg
Leg type with adjustable foot + 5 cm
Leg length 620 mm
Number of legs 4 pcs.
Total table height 860-900 mm
Weight of table top 535 kg
Fast delivery (3-5 days) with DHL Courier in Sweden
Free shipping
S355J2+N STEEL
The welding table top is made of S355J2+N steel, which is characterised by high strength and resistance to impact and deformation and also provides protection against corrosion and weld spatter.
The 25 mm thick table top guarantees the table's durability and resistance to mechanical damage.
MILLIMETRE SCALE
The applied millimetre scale facilitates precise assembly of the workpiece.
3D SIDE
Enables the work surface to be enlarged and table tops to be joined.
D28 SYSTEM
28 mm drilled and chamfered holes.
Worktop dimensions 1200 x 1200 x 200 mm
Material Steel S355J2+N according to EN 10025-2
Table top thickness 25 mm
Table horizontal accuracy 0.1/1000mm
Vertical table accuracy 0.1/200 mm
Standard D28 (28 mm diameter drilled and milled holes)
Load capacity 2000 kg/leg
Leg type with wheel
Leg length 620 mm
Number of legs 4 pcs.
Total table height 940 mm
Weight of table top 514 kg
Fast delivery (3-5 days) with DHL Courier in Sweden
Free shipping
S355J2+N STEEL
The welding table top is made of S355J2+N steel, which is characterised by high strength and resistance to impact and deformation and also provides protection against corrosion and weld spatter.
The 25 mm thick table top guarantees the table's durability and resistance to mechanical damage.
MILLIMETRE SCALE
The applied millimetre scale facilitates precise assembly of the workpiece.
3D SIDE
Enables the work surface to be enlarged and table tops to be joined.
D28 SYSTEM
28 mm drilled and chamfered holes.
Worktop dimensions 1500 x 1000 x 200 mm
Material Steel S355J2+N according to EN 10025-2
Table top thickness 25 mm
Table horizontal accuracy 0.1/1000mm
Vertical table accuracy 0.1/200 mm
Standard D28 (28 mm diameter drilled and milled holes)
Load capacity 2000 kg/leg
Leg type with wheel
Leg length 620 mm
Number of legs 4 pcs.
Total table height 940 mm
Weight of table top 535 kg
Fast delivery (3-5 days) with DHL Courier in Sweden
Free shipping
S355J2+N STEEL
The welding table top is made of S355J2+N steel, which is characterised by high strength and resistance to impact and deformation and also provides protection against corrosion and weld spatter.
The 25 mm thick table top guarantees the table's durability and resistance to mechanical damage.
MILLIMETRE SCALE
The applied millimetre scale facilitates precise assembly of the workpiece.
3D SIDE
Enables the work surface to be enlarged and table tops to be joined.
D28 SYSTEM
28 mm drilled and chamfered holes.
Worktop dimensions 2000 x 1000 x 200 mm
Material Steel S355J2+N according to EN 10025-2
Table top thickness 25 mm
Table horizontal accuracy 0.1/1000mm
Vertical table accuracy 0.1/200 mm
Standard D28 (28 mm diameter drilled and milled holes)
Load capacity 2000 kg/leg
Leg length 620 mm with adjustable foot + 5 cm
Number of legs 4 pcs.
Total table height 870 mm
Weight of table top 720 kg
Fast delivery (3-5 days) with DHL Courier in Sweden
Free shipping
Set includes:
SP010-23-300L Clamping and locating angle 275x100x300mm left 1 pc.
SP010-23-300R Clamping and locating angles 275x100x300mm right 1 pc.
SP010-23-600L Clamping and locating angles for holes 375x100x600mm left 1 pc.
SP010-23-600R Clamping and locating angle for holes 375x100x600mm right 1 pc.
SP010-23-800L Clamping and positioning angle for bores 375x100x800mm left 1 pc.
SP010-23-800R Clamping and positioning angle for bores 375x100x800mm right 1 pc.
SP010-30-002 Clamping and positioning angle for holes 175x50x175mm hole/slot 6 pcs.
SP010-30-005 Clamping and positioning angle for holes 175x50x75mm hole/slot 4 pcs.
SP010-50-002 Universal plug 225x50x25mm hole/slot 6 pcs.
SP010-50-014 Universal plug 500x100x25mm hole/slot 4 pcs.
SP010-70-001 Compensation screw for 180° locking with steel handle 300x300 mm 12 pcs.
SP010-60-001 Quick locking bolt fi 28x50mm 40 pcs.
SP010-90-003A Allen key 150mm hexagonal 1 pc.
SP010-90-004 Nylon brush fi 30x80mm 1 pc.
SP010-90-001 Oil stone 200x50x25mm for cleaning 1 pc.
SP010-90-002 Spray bottle 1l 1 pc.
Fast delivery (3-5 days) with DHL Courier in Sweden
Free shipping
NITRIDED STEEL S355J2+N
The S355J2+N steel grade used to make the welding table offers high impact and scratch resistance, while the plasma nitrided weld table top significantly increases protection against corrosion and weld spatter.
The 25 mm thick table top guarantees the table's durability and resistance to mechanical damage.
MILLIMETRE SCALE
The applied millimetre scale facilitates precise assembly of the workpiece.
3D SIDE
Enables the work surface to be enlarged and table tops to be joined.
D28 SYSTEM
28 mm drilled and chamfered holes.
Work surface dimensions 2000 x 1000 x 200 mm
Manufactured with welding and protective coating (nitrided)
Material Steel S355J2+N according to EN 10025-2
Table top thickness 25 mm
Table horizontal accuracy 0.1/1000mm
Vertical table accuracy 0.1/200 mm
Standard D28 (28 mm diameter drilled and milled holes)
Load capacity 2000 kg/leg
Leg type with adjustable foot +5cm
Leg length 620 mm
Number of legs 4 pcs.
Total table height 870 mm
Weight of table top 720 kg
Fast delivery (3-5 days) with DHL Courier in Sweden
Free shipping
NITRIDED STEEL S355J2+N
The S355J2+N steel grade used to make the welding table offers high impact and scratch resistance, while the plasma nitrided weld table top significantly increases protection against corrosion and weld spatter.
The 25 mm thick table top guarantees the table's durability and resistance to mechanical damage.
MILLIMETRE SCALE
The applied millimetre scale facilitates precise assembly of the workpiece.
3D SIDE
Enables the work surface to be enlarged and table tops to be joined.
D28 SYSTEM
28 mm drilled and chamfered holes.
Work surface dimensions 2400 x 1200 x 200 mm
Manufactured with welding and protective coating (nitrided)
Material Steel S355J2+N according to EN 10025-2
Table top thickness 25 mm
Table horizontal accuracy 0.1/1000mm
Vertical table accuracy 0.1/200 mm
Standard D28 (28 mm diameter drilled and milled holes)
Load capacity 2000 kg/leg
Leg type with adjustable foot +5cm
Leg length 620 mm
Number of legs 6 pcs.
Total table height 870 mm
Weight of table top 960 kg
Fast delivery (3-5 days) with DHL Courier in Sweden
Free shipping
NITRIDED STEEL S355J2+N
The S355J2+N steel grade used to make the welding table offers high impact and scratch resistance, while the plasma nitrided weld table top significantly increases protection against corrosion and weld spatter.
The 25 mm thick table top guarantees the table's durability and resistance to mechanical damage.
MILLIMETRE SCALE
The applied millimetre scale facilitates precise assembly of the workpiece.
3D SIDE
Enables the work surface to be enlarged and table tops to be joined.
D28 SYSTEM
28 mm drilled and chamfered holes.
Work surface dimensions 3000 x 1500 x 200 mm
Manufactured with welding and protective coating (nitrided)
Material Steel S355J2+N according to EN 10025-2
Table top thickness 25 mm
Table horizontal accuracy 0.1/1000mm
Vertical table accuracy 0.1/200 mm
Standard D28 (28 mm diameter drilled and milled holes)
Load capacity 2000 kg/leg
Leg type with adjustable foot +5cm
Leg length 620 mm
Number of legs 6 pcs.
Total table height 870 mm
Weight of table top 1500 kg
Fast delivery (3-5 days) with DHL Courier in Sweden
Free shipping
In the welding world, both in heavy carpentry and in DIY, equipment is essential to work comfortably and accurately in order to get aesthetically and functionally good results.
The equipment needs to be commensurate to the work the operator is going to perform; the more complex the project, the more precision is needed, the higher the equipment’s quality needs to be.
The welding table is a very valid tool to get good results and simplify DIY works, and it is essential for professional works.
Base level welding tables have a metal surface with a metal frame, to allow connecting the ground wire directly to the welding table rather than to the base material, in order to not disturb the operator during the welding process.
Professional welding tables are usually equipped with adjustable pins on the legs’ extremities, to make sure the working surface is parallel to the floor even when the floor itself is uneven.
To benefit of all the welding table’s advantages, you need to acquire a model with a modular design; this allows to install different types of inserts anywhere on the work surface, among which are retention bars, stop bars, clamps, etc. Furthermore, the metal welding table allows for a better use of magnetic positioners.
The welding table with modular surface allows for faster and more accurate works, and it is a valid help for more complex projects or to keep heavy joints in place.
A high-end welding table’s surface is made of a metal prepped to prevent welding ledges from sticking, in order to preserve perfect flatness and guarantee the work surface’s durability.
In any case, it is good norm to use an anti-stick spray on the welding table’s work surface before starting to weld, especially during processes that generate many ledges, such as coated-electrode or animated wire weldings with no gas.