Free shipping on purchases over 300€ 
Free shipping on purchases over 300€
| Combinations | Price | |
| 10,98 € | ||
| 13,98 € | ||
| 28,23 € | ||
| 46,36 € | ||
10 pcs box
Available diameters: 1 to 3.2 mm.
For TIG AC
Fast delivery (3-5 days) with DHL Courier in
Slovenia
Choose your country
| Combinations | Price | |
| 10,98 € | ||
| 13,98 € | ||
| 28,23 € | ||
| 46,26 € | ||
Box 10 electrodes. Lantanium gold.
Available diameters 1 to 3,2 mm.
Universal for DC and AC.
Fast delivery (3-5 days) with DHL Courier in
Slovenia
Choose your country
| Combinations | Price | |
| 10,98 € | ||
| 13,98 € | ||
| 28,23 € | ||
| 46,36 € | ||
Box of 10 WTh20 electrodes
Available diameters from 1 to 3.2 mm.
Excellent DC performance on steel, stainless steel, copper, etc.
Optimal electrode for DC welding with low amperages. The arc is very stable and the electrode responds very well to wear. Also used for orbital welding, pipe production and for thin sheet metal work and precision applications. Ideal for welding carbon steel, stainless steel, nickel alloys and titanium.
With slight radioactive irradiation due to the addition of thorium
Due to high health impact irrespective of use
The grey electrode is an excellent alternative to this Thorium.
Fast delivery (3-5 days) with DHL Courier in
Slovenia
Choose your country
| Combinations | Price | |
| 10,98 € | ||
| 13,98 € | ||
| 28,23 € | ||
| 46,36 € | ||
Box 10 electrodes. Lantanium blue.
DAvailable diameters 1 to 3,2 mm.
Universal for DC and AC.
Fast delivery (3-5 days) with DHL Courier in
Slovenia
Choose your country
| Combinations | Price | |
| 10,98 € | ||
| 13,98 € | ||
| 28,23 € | ||
| 46,36 € | ||
Box 10 electrodes, Cerium 2 %
Available diameters: 1 to 3.2 mm.
For DC TIG welding for steel and stainless steel
Fast delivery (3-5 days) with DHL Courier in
Slovenia
Choose your country
The D33 handheld sharpener is a small-sized, manual sharpener for tungsten electrodes used in TIG welding. It is powered by a single-phase 230V source power. The D33 handheld sharpener allows for precise sharpening or cutting of the end of the tungsten electrode, according to technological requirements.
The device enables sharpening of electrodes with diameters ranging from 1.0 to 4.0mm, at angles of 15°, 18°, 22.5°, and 30°. Its ergonomic design ensures user convenience. The advantages of the device include high efficiency, low noise level, and energy-saving features.
Grinder, in a set with a dust cover and a key, is offered in a handy and durable case.
Input ~1× 230V ± 10% 50 / 60 Hz
Power 750W
Grinding angle 15°, 18°, 22.5°, 30°
Rotation speed 11000 rpm
Electrode diameter 1.0 - 4.0 mm
Grinding segment diameter Ø33.5 x Ø5 x 2.4 mm
Sharpening machine dimensions 340 x 76 x 76 mm
Sharpening machine weight 1.6 kg
Fast delivery (3-5 days) with DHL Courier in
Slovenia
Free shipping
Choose your country
Tungsten electrodes are used for TIG welding and, thanks to tungsten’s extremely high melting temperature of about 3400°C, they allow to maintain the electric arc with the workpiece to be welded.
Various types exist, but usually to weld in AC alternating current, the most used is pure green tungsten. It is not sharpened and during welding it is rounded naturally.
On top-welding.com we recommend 10-pieces boxes of pure tungsten electrodes of different thicknesses, 1 - 1.6 - 2.4 and 3.2mm, which are the most requested sizes.
Since with this type of electrode it is possible to weld mainly aluminum, it is important to know how to adjust the welding machine in an optimal way to obtain a correct penetration and an excellent trigger.
In professional welding machines there is often a pre-heating function for the electrode that helps the operator in the ignition of the electric arc. In this heating function, it is important to select the thickness of the electrode in use to allow the welding machine electronics to adjust the parameters automatically.
There are also AC frequency adjustments that allow to tighten or widen the arc and the BALANCE function for greater or lesser elimination of oxidation from the piece.
As mentioned above, electrodes of different thicknesses are recommended according to the thickness of the base material to be welded and therefore according to the current used. Below we indicate the recommended amperages based on the diameter of the electrode.
Ø 1,0 mm from 10 to 50 A
Ø 1,6 mm from 40 to 80 A
Ø 2,0 mm from 60 to 110 A
Ø 2,4 mm from 80 to 150 A
Ø 3,2 mm from 100 to 200 A
Ø 4,0 mm from 150 to 250 A
Ø 5,0 mm from 200 to 350 A
Among the most important parameters to adjust on the control panel of the welder, we would like to mention the Post Gas function. After welding, when the torch button is released, the gas continues to exit the torch to cool and avoid oxidizing the tungsten and improve subsequent triggers. Below we indicate the recommended Post Gas settings according to the current used.
50 A 5 seconds
100 A 10 seconds
150 A 15 seconds
200 A 20 seconds
250 A 25 seconds
300 A 30 seconds
Tungsten electrodes are used for TIG welding and, thanks to tungsten’s extremely high melting temperature of about 3400°C, they allow to maintain the electric arc with the workpiece to be welded.
Various types exist, but usually for DC welding of iron and stainless steel, the most used is the grey waxed tungsten. It is important to sharpen it to obtain a precise and direct arc to the point to be welded.
On top-welding.com we recommend 10-pieces boxes of grey tungsten electrodes of different thicknesses, 1 - 1.6 - 2.4 and 3.2mm, which are the most requested sizes.
Depending on the thickness of the material to be welded, the welding current will be different and consequently also the tungsten diameter may vary; below we indicate the recommended currents according to thickness.
Tungsten electrode diameter
Ø 1,0 mm from 10 to 80 A
Ø 1,6 mm from 50 to 120 A
Ø 2,0 mm from 80 to 190 A
Ø 2,4 mm from 100 to 240 A
Ø 3,2 mm from 150 to 300 A
Ø 4,0 mm from 300 to 450 A
Ø 5,0 mm from 500 to 650 A
Among the most important parameters to adjust on the control panel of the welder, we would like to mention the Post Gas function. After welding, when the torch button is released, the gas continues to exit the torch to cool and avoid oxidizing the tungsten and improve subsequent triggers. Below we indicate the recommended Post Gas settings according to the current used.
50 A 5 seconds
100 A 10 seconds
150 A 15 seconds
200 A 20 seconds
250 A 25 seconds
300 A 30 seconds
Italy
Austria
Belgium
Luxembourg
Netherlands
Monaco
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Hungary
Germany
Spain
France
India
