Combinations | Price | |
8,49 € | ||
7,78 € | ||
Steed wire coil Ø 0,6 or 0,8 mm. Weight 700 gr for iron, steel welding.
It has to be used with gas ( mix Argon + CO²)
Coil diameter 100 mm
Fast delivery (3-5 days) with DHL Courier in Slovenia
Combinations | Price | |
13,60 € | ||
11,97 € | ||
10,92 € | ||
Flux cored wire coil Ø 100mm 700 gr. Available in three different thickness :0.8, 0.9 e 1.2 mm.
Weight 700 gr
This wire doesn't need gas
Fast delivery (3-5 days) with DHL Courier in Slovenia
Combinations | Price | |
13,89 € | ||
14,31 € | ||
Al MG 5 Ø100, 400 gr
2 available thickness: 0,8 and 1 mm
Argon gas protection
Fast delivery (3-5 days) with DHL Courier in Slovenia
Special solid wire particularly suitable for single pass welding of galvanized or electro-galvanized steels.
The presence of purifiers elements in the weld pool -Al-Ti-Zr, inhibit the formation of blowholes and porosity, also for steels with a dirty or rusty surface. It has to be used with Mix Argon CO2 to obtain welds without spatter well connected by cords.
Diameter: 0.8mm
700gr
AWS A5.18: ER 70S-2
Coil diameter: 100mm
Fast delivery (3-5 days) with DHL Courier in Slovenia
Stainless steel coil 308L Ø0,8 mm, 700 gr
It has to be used with gas ( Argon +CO²).
Coil diameter Ø 100mm
Fast delivery (3-5 days) with DHL Courier in Slovenia
Wire coil for Corten steel
5Kg
Wire diameter 1mm
Coil diameter 200mm
AWS A5.28: ER80S-G
EN ISO 14341: G 46 4 M21 Z
Fast delivery (3-5 days) with DHL Courier in Slovenia
Combinations | Price | |
35,99 € | ||
23,74 € | ||
22,71 € | ||
Steel wire coil Ø 200mm, weight 5 Kg for iron and steel welding
Available thickness : 0,6 - 0,8 and 1 mm
It has to be used with gas ( mix Argon + CO²)
Fast delivery (3-5 days) with DHL Courier in Slovenia
Aluminium wire 4043 Al Si5
Coil Ø 200 mm 2 KG
Wire thickness: 1 mm
Fast delivery (3-5 days) with DHL Courier in Slovenia
Combinations | Price | |
39,90 € | ||
37,26 € | ||
Aluminium wire coil Ø 200mm 2 KG
AlMg5 - 5356
Available thickness: 0.8 and 1 mm
Fast delivery (3-5 days) with DHL Courier in Slovenia
Stainless steel 308
Fast delivery (3-5 days) with DHL Courier in Slovenia
Combinations | Price | |
54,28 € | ||
49,52 € | ||
52,92 € | ||
4 thickness availables: Ø 0,8 - 1 or 1.2mm
Weight 16 Kg
Coil diameter 300mm
Fast delivery (3-5 days) with DHL Courier in Slovenia
Stainless steel 316
Fast delivery (3-5 days) with DHL Courier in Slovenia
Wire coil 309 suitable for heterogeneous welding of stainless steel with carbon steel
Coil 2,5kg
Thickness 0.8mm
Fast delivery (3-5 days) with DHL Courier in Slovenia
Stainless Steel 308
Coil 5 kg
Thickness 0.8mm
Fast delivery (3-5 days) with DHL Courier in Slovenia
Suitable for Telwin models:
Telmig 195/2-200/2-203/2-250/2-251/2-281/2
Tecnomig 180 Euro - Technomig 210 dual synergic
Equipped with:
1 alluminium coil 0,8mm Ø 100 mm peso 450gr - 1 kit support for Ø 100 coil - 1 teflon liner 3 m - 1 roll 0,8 / 1 mm - 5 contact tips Ø 0,8 mm and 1 mm.
Fast delivery (3-5 days) with DHL Courier in Slovenia
CuSi Ø 200 mm
Weigth 2 Kg
Suitable for car body repair on high stress steel HSS-EHS et UHS
EN ISO 14640 : SCuSi3Mn1-S Cu6560
Thickness: Ø 0,8 mm
Fast delivery (3-5 days) with DHL Courier in Slovenia
For Telwin machines: Technomig 215 Dual Synergic - Electromig 220 Synergic e 230 Wave
1 liner for 3 meter torch,
1 roll 0,8 / 1 mm AL,
3 contact tips Ø 0,8 mm and 1 mm.
Fast delivery (3-5 days) with DHL Courier in Slovenia
Stainless steel 316
Coil 5 kg
Thickness : 0.8mm
Fast delivery (3-5 days) with DHL Courier in Slovenia
In the welding sector you can find different processes to obtain the same result. This is what someone with little knowledge of the various welding processes may think.
A more educated public knows that every welding process is designed for a specific process to obtain a different result. It is also very important to consider where the operator is going to weld.
Each of these processes MMA, TIG, MIG-MAG is better suited to a specific application than others.
The MMA process, also known as covered electrode welding, is suitable for working in the open air or in isolated places, because the equipment needed is easy to handle and does not require a gas shield to obtain satisfactory results. This process cannot be called clean, because during electrode melting there are metal spots and slag that must be removed at the end of welding. This process has a low efficiency. In fact, the operator is forced to interrupt the work process in order to replace the electrode and complete a large weld.
The TIG process is suitable to thin parts which require a great appearance, such as motorcycle or bicycle frames. This welding process is not particularly suitable for outdoor use because it requires a gas shield that may be dispersed by the wind. The TIG process is not recommended for large welds because the operating speed is not particularly great.
MIG-MAG welding is probably the most widely used process in the industrial field, and in the last decade, thanks to the appearance of multi-function welding equipment, this welding process is spreading rapidly in the hobby field as well.
MIG-MAG welding is very versatile, depending on the amperage and the type of MIG MAG welding wire used. This process is suitable for light work, but also for use in heavy carpentry. This process has the highest efficiency compared to other welding methods. It allows very long and demanding welding operations without the need for any interruption to reequip the welding machine. The higher or lower efficiency depends on the size of the wire coil for the MIG-MAG welding machine, which may vary from 700 grams to 15-16 kg.
This welding process is very versatile because it allows the operator to work on different materials with the same welding machine. Simply replace a few consumables to have an easier working process, and by changing the steel wire coil with an aluminum wire coil or by equipping a stainless-steel wire coil you can proceed with the necessary welding.
The consumables that can be replaced based on the material of the MIG-MAG welding wire coil are:
It is often recommended to equip a second torch designed for use with an aluminum wire coil to avoid frequent replacement of the welding liner and consumables, which could become damaged early due to excessive stress.
The MIG MAG welding process, besides ensuring a very high efficiency, is the ideal process for machining operations that require filling even a large gap between 2 joints.
MIG MAG welding, as mentioned above, is the welding process with the highest efficiency because the MIG MAG welding wire coil is the electrode. When the wire is pushed by the wire roller through the wire bundle, it reaches the welding torch and when it comes into contact with the base metal it melts through a series of short circuits.